Skip to main content

Horizontal Balancing Machines

Horizontal balancing machines are ideally suited for rotors with their own journals.
They are universal in design in that a wide variety of parts, sizes, and shapes will fit a given size machine as long as they are within the weight, diameter, and length limitations.
Horizontal machines use mostly hard-bearing technology for maximum efficiency and accuracy.
Standard sizes range from maximum weight capacities of 0.5kg to 500,000 kg and higher.
All models are available with a variety of instrumentations to fit any budget or meet any technical requirement.

Belt drive balancing machine

The horizontal hard bearing dynamic balancing machines comes standard with our windows based touch screen operated measuring system. They are available from very small weight capacities up to 50,000kg with different lengths and diameter capabilities. The standard drive system is a belt drive with an optional end drive for the larger diameter and heavier parts.

Horizontal balancers can balance a wide variety of parts. Just about anything that needs to be balanced can be done on a horizontal system. Some of the usual parts include armatures, blowers, fans, pump impellers, turbochargers, centrifuges, spindles, crankshafts, rolls and similar parts.

  • HARD BEARING SUSPENSION
  • PERMENENT CALIBRATION
  • SAFER AND EASIER TO USE
  • BELT DRIVE AND/OR END DRIVE
  • WINDOWS BASED TOUCH SCREEN OPERATED MEASURING SYSTEM
  • ADVANCED ELECTRONIC MEASURING INSTRUMENTATION
  • DURABLE AND RELIABLE SENSORS FOR HIGH ACCURACY AND LINEARITY
  • SPECIALLY DESIGNED HARD BEARING PEDESTALS BUILT FOR DURABILITY AND PERFORMANCE
  • CAST IRON BASE
  • OPTIONAL ON MACHINE CORRECTIONS SYSTEMS
TECHNICAL DATA AT A GLANCEPHQ-1.6/5PHQ-1.6A/5APHQ-16A
Max Mass of Workpiece(kg)1.6/51.6/516
Max Diameter of Workpiece (mm)Φ300Φ300Φ300
Distance Between Two Support Bearings (mm)15~50060~50060~500
Journal Diameter Scope of Workpiece (mm)Φ 3~40(120°)Φ 3~40Φ 5~40
Diameter Scope of Driving Belt (mm)Φ20~85Φ15~150Φ15~150
Rotational Speed when the Diameter of Driving Belt is 100mm (r/min) 185,335,390,700 (1)~1470~1470
Motor Power (kw)0.15DC0.23DC0.23DC
Min Achievable Residual Unbalance Amount (emar)≤0.3g· mm/kg≤0.3g· mm/kg≤0.3g· mm/kg
TECHNICAL DATA AT A GLANCEPHQ-50PHQ-160HPHQ-300HPHQ-500H
Max Mass of Workpiece(kg)50160300500
Max Diameter of Workpiece (mm)Φ700Φ1000Φ1220Φ1500
Distance Between Two Support Bearings (mm)80~700130~1270130~1270130~1270
Journal Diameter Scope of Workpiece (mm)Φ 3~40(120°)Φ 15~75 (3)Φ 15~75 (3)Φ 15~75 (3)
Diameter Scope of Driving Belt (mm)Φ18~200Φmax400Φmax500Φmax600
Rotational Speed when the Diameter of Driving Belt is 100mm (r/min) 700,1050 (1)756,1176 (1)756,1176 (1)756,1176 (1)
Motor Power (kw)0.75 (2)1.5 (2)1.5 (2)2.2 (2)
Length of Bed (mm) 150015001500
Min Achievable Residual Unbalance Amount (emar)≤0.5g· mm/kg≤0.5g· mm/kg≤0.5g· mm/kg≤0.5g· mm/kg
TECHNICAL DATA AT A GLANCEPHQ-1000HPHQ-2000HPHQ-3000HPHQ-5000H
Max Mass of Workpiece(kg)1000200030005000
Max Diameter of Workpiece (mm)Φ1600Φ1800Φ2100Φ2400
Distance Between Two Support Bearings (mm)160~1780160~1780160~2280500~2200
Journal Diameter Scope of Workpiece (mm)Φ 25~120 (4)Φ 25~120 (4)Φ 25~120 (4)Φ40~380
Diameter Scope of Driving Belt (mm)Φmax700Φmax800Φmax900Φ50~1000
Rotational Speed when the Diameter of Driving Belt is 100mm (r/min) 1330,1918 (1)684,986 (1)921,1329 (1)795,1853 (1)
Motor Power (kw)4 (2)5.5 (2)7.5 (2)15 (2)
Length of Bed (mm)2000200025002500
Min Achievable Residual Unbalance Amount (emar)≤0.5g· mm/kg≤0.5g· mm/kg≤0.5g· mm/kg≤1g· mm/kg

(1) Stepless speed regulation

(2) Frequency conversion

(3) Can add to 75-180

(4) Can add to 120-240

End drive balancing machine - Universal joint drive Balancing machines

The horizontal hard bearing dynamic balancing machines comes standard with our windows based touch screen operated measuring system. They are available from very small weight capacities up to 50,000kg with different lengths and diameter capabilities. The standard drive system is a belt drive with an optional end drive for the larger diameter and heavier parts.

Horizontal balancers can balance a wide variety of parts. Just about anything that needs to be balanced can be done on a horizontal system. Some of the usual parts include armatures, blowers, fans, pump impellers, turbochargers, centrifuges, spindles, crankshafts, rolls and similar parts.

  • HARD BEARING SUSPENSION
  • PERMENENT CALIBRATION
  • SAFER AND EASIER TO USE
  • BELT DRIVE AND/OR END DRIVE
  • WINDOWS BASED TOUCH SCREEN OPERATED MEASURING SYSTEM
  • ADVANCED ELECTRONIC MEASURING INSTRUMENTATION
  • DURABLE AND RELIABLE SENSORS FOR HIGH ACCURACY AND LINEARITY
  • SPECIALLY DESIGNED HARD BEARING PEDESTALS BUILT FOR DURABILITY AND PERFORMANCE
  • CAST IRON BASE
  • OPTIONAL ON MACHINE CORRECTIONS SYSTEMS
TECHNICAL DATA AT A GLANCEPHW-160HPHW-300HPHW-500H
Mass Scope of Workpiece(kg)16030050
Max Diameter of Workpiece (mm)Φ1000Φ1220Φ1500
Distance Between Two Support Bearings (mm)Min 60Min 60Min 60
Journal Diameter Scope of Workpiece(mm)Φ15~75 (2)Φ15~75 (2)Φ15~75 (2)
Max Distance between Driving Flange and Right Bearing Support (mm)150015001500
Rotational Speed of the Main Axis(r/min)600,1095 (4)600,1095 (4)600,1095 (4)
Motor Power (kw)3 (1)3 (1)3 (1)
Torque of Universal Joint Shaft(N·m)606060
Length of Bed (mm)2500)25002500
Min Achievable Residual Unbalance Amount(emar)≤1g· mm/kg≤1g· mm/kg≤1g· mm/kg
TECHNICAL DATA AT A GLANCEPHW-1000HPHW-2000HPHW-3000HPHW-5000H
Mass Scope of Workpiece(kg)1000200030005000
Max Diameter of Workpiece (mm)Φ1600Φ1800Φ2100Φ2400
Distance Between Two Support Bearings (mm)Min 60Min 60Min 60Min 320
Journal Diameter Scope of Workpiece(mm)Φ25~120 (3)Φ25~120 (3)Φ25~120 (3)Φ40~380 (3)
Max Distance between Driving Flange and Right Bearing Support (mm)1600190019002500
Rotational Speed of the Main Axis(r/min)600,1095 (4)485,818 (4)133,225,396.634,970 (4)192,325,571,915,1400 (4)
Motor Power (kw)4 (1)7.5 (1)7.5 (1)15 (1)
Torque of Universal Joint Shaft(N·m)2503007001250
Length of Bed (mm)2500)300030004000
Min Achievable Residual Unbalance Amount(emar)≤1g· mm/kg≤1g· mm/kg≤1g· mm/kg≤1g· mm/kg
TECHNICAL DATA AT A GLANCEPHW-10000HPHW-15000PHW-20000PHW-30000
Mass Scope of Workpiece(kg)10000150002000030000
Max Diameter of Workpiece (mm)Φ2400Φ2800Φ2800Φ3000
Distance Between Two Support Bearings (mm)Min 320Min 450Min 450Min 500
Journal Diameter Scope of Workpiece(mm)Φ60~400Φ60~400Φ60~400Φ80~500
Max Distance between Driving Flange and Right Bearing Support (mm)4000420052006000
Rotational Speed of the Main Axis(r/min)Stepless speed regulation195,336,561, 916,1374 (4)195,336,561, 916,1374 (4)127,218,365, 596,895,1104 (4)
Motor Power (kw)22 (1)30 (1)55 (1)75 (1)
Torque of Universal Joint Shaft(N·m)2250225050007800
Length of Bed (mm)5500)600070008000
Min Achievable Residual Unbalance Amount(emar)≤2g· mm/kg≤2g· mm/kg≤2g· mm/kg≤2g· mm/kg

(1) Frequency conversion

(2) Can add to 75-180

(3) Can add to 120~240

(4) Stepless speed regulation

Drive shaft Balancing machine

Drive-line balancing machines

The drive-line hard bearing balancing machine comes standard with our windows based touch screen operated measuring system. They are available to balance car, truck and heavy equipment shafts. We can accommodate 1, 2 and 3 piece shafts and can balance up to 3200 rpm.

  • HARD BEARING SUSPENSION
  • PERMENENT CALIBRATION
  • WINDOWS BASED TOUCH SCREEN OPERATED MEASURNG SYSTEM
  • ADVANCED ELECTRONIC MEASURING INSTRUMENTATION
  • DURABLE AND RELIABLE SENSORS FOR HIGH ACCURACY
  • SPECIALLY DESIGNED HARD BEARING PEDESTALS BUILT FOR DURABILITY AND PERFORMANCE
  • 1,2 AND 3 PIECE SHAFTS
  • OPTIONAL CORRECTION SYSTEM AVAILABLE
  • CAST IRON BASE
TECHNICAL DATA AT A GLANCEPHCW-100PHCW-200PHCW-1000PHCW-2000
Max Mass of Workpiece (kg)10020010002000
Effective length of workpiece(mm)2000200030003000
Max Diameter of Workpiece(mm)Φ130Φ130Φ400Φ400
Shaft tube diameter of workpiece(mm)Ø120Ø120Ø300Ø300
Balancing speed(mm)1600~32001200~3200600-1200450-1200
Motor power(kw)1.5Frequency conversion1.5Frequency conversion3Frequency conversion3Frequency conversion
Universal joint torque(N.M)6060300300
Min Achievable Residual Unbalance Amount(e mar)≤5g≤5g≤5g≤5g
Once reduced rate (%)≥85≥85≥85≥85
     
TECHNICAL DATA AT A GLANCEPHCW-100TPHCW-200TPHCW-100FPHCW-200F
Max Mass of Workpiece (kg)100200100200
Effective length of workpiece(mm)4500450055005500
Max Diameter of Workpiece(mm)Φ130Φ130Φ130Φ130
Shaft tube diameter of workpiece(mm)Ø120Ø120Ø120Ø120
Balancing speed(mm)1600~32001600~32001600~32001600~3200
Motor power(kw)2.2Frequency conversion2.2Frequency conversion2.2Frequency conversion2.2Frequency conversion
Universal joint torque(N.M)60606060
Min Achievable Residual Unbalance Amount(e mar)≤5g≤5g≤5g≤5g
Length of bed (mm)6000600070007000
Once reduced rate (%)≥85≥85≥85≥85

Most of our standard horizontal balancers meet our customer’s needs but there are certain applications or part configurations that require special treatment. In those cases our engineers review the project and make recommendations. What we recommend is usually a modification of our standard balancers. Some applications may require a soft bearing suspension or a different correction system, or a self-driven requirement. If you have a special request, we will be glad to review and give you our best recommendations.

Cross flow fan blade balancing machine

Contact Us for Pricing that Fits Your Budget

info@jpbalance.com